PB COOL [AON] support

[mhalweg]

this is what's in my pbsv.cfg file

pb_sv_MsgPrefix "PunkBuster Server" //[PB Message Prefix (default=^3PunkBuster Client)]
pb_sv_MaxDlRate 4 //[KB/sec requested per file (default=4)]
pb_sv_MaxConDls 1 //[Concurrent downloads (default=1)]
pb_sv_KickLen 2 //[Minutes (default=2)]
pb_sv_CvarFreq 6 //[# of range checks per minute]
pb_sv_CvarLogging 1 //[1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk 1 //[0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse 99 //[Frequency to auto-send CvarUser (minutes)]
pb_sv_CvarChangedPulse 99 //[Frequency to auto-send CvarChanged (minutes)]
pb_sv_CQC 1 //[0=No, 1=Yes (default=1)]
pb_sv_LogSync 0 //[0=No, 1=Yes (default=0)]
pb_sv_SsFloor 1 //[Low screenshot filename serial #]
pb_sv_SsCeiling 5000 //[High screenshot filename serial #]
pb_sv_SsCmd "" //[Filename of system command to run after screenshots]
pb_sv_SsWidth 800 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 600 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]
pb_sv_SsSrate 1 //[Sample Rate for remote screenshots]
pb_sv_SsDelay 2 //[Maximum delay client waits before capturing screenshot]
pb_sv_SsPath "" //[Path where remote screenshots are saved]
pb_sv_AutoSsFrom 300 //[Min # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo 600 //[Max # of seconds to wait before requesting next ss]
pb_sv_AutoSs 1 //[0=No, 1=Yes (default=0)]
pb_sv_ssLogging 0 //[1=Reg. Log, 2=SS Log, 3=Both, 0=Neither]
pb_sv_ssTimeout 0 //[Seconds]
pb_sv_Sleep 60 //[# of Milliseconds (default=60)]
pb_sv_PowerMin 10 //[Power Points]
pb_sv_PowerDef 1 //[Power Points]
pb_sv_PowerKickLen 5 //[Minutes (default=5)]
pb_sv_HttpPort 9040 //[Port #]
pb_sv_HttpAddr "8.9.4.150" //[External IP Address]
pb_sv_HttpRefresh 60 //[Seconds]
pb_sv_HttpKey "XXXXXXX" //[Key]
pb_sv_HttpMaps "" //[Map list (separate by spaces)]
pb_sv_ScoreKick 0 //[Min score (negative)]
pb_sv_ChangePeriod 999 //[Seconds]
pb_sv_ChangeMax 1 //[Max name changes allowed]
pb_sv_DupNameGrace 0 //[Seconds]
pb_sv_AutoUpdBan 0 //[0=No, 1=Yes (default=0)]
pb_sv_ExtChar 1 //[0=No, 1=Yes (default=0)]
pb_sv_GuidRelax 2 //[1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_RconReload 0 //[0=No, 1=Yes (default=0)]
pb_sv_HttpMapsPath "" //[Path where maps are loaded from in WebTool]
pb_sv_HttpColText1 "FFFFFF" //[Text Color #1 in WebTool (default=FFFFFF)]
pb_sv_HttpColText2 "0000FF" //[Text Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColBack1 "000000" //[Background Color #1 in WebTool (default=000000)]
pb_sv_HttpColBack2 "808080" //[Background Color #2 in WebTool (default=808080)]
pb_sv_HttpColLine1 "FF0000" //[Line Color #1 in WebTool (default=FF0000)]
pb_sv_HttpColLine2 "0000FF" //[Line Color #2 in WebTool (default=0000FF)]
pb_sv_HttpColMsg "FF0000" //[Message Color in WebTool (default=FF0000)]
pb_sv_HttpShowGuid 0 //[0=No, 1=Yes (default=0)]
pb_sv_Restrictions 1 //[0=No, 1=Yes (default=1)]
pb_sv_FileWhitelist "" //[Folder Filename Filename ... Filename]
pb_sv_EmptyName 0 //[0=No, 1=Yes (default=0)]
pb_sv_LogFloor 1 //[Low log filename serial #]
pb_sv_MinName 0 //[Min Characters in Player name (default=0)]
pb_sv_MaxName 0 //[Max Characters in Player name (default=0)]
pb_sv_LanMask "" //[IP Address Mask for LAN Players (default=)]
pb_sv_Lan 0 //[0=No, 1=Yes (default=0)]
pb_sv_UpdateGrace 600 //[Seconds to wait before Update Failure kick]
pb_sv_NoGuidGrace 1 //[Seconds to wait before No GUID kick]
pb_sv_AliasFn "" //[Filename (default="pbalias.dat")]
pb_sv_AliasAutoLoad 0 //[0=No, 1=Yes (default=0)]
pb_sv_AliasMax 0 //[Max # of Aliases to track for each PB GUID]
pb_sv_AliasMaxEnforce 0 //[0=No, 1=Yes (default=0)]


;Badname List - pb_sv_badname [grace_period_secs] [disallowed text]

;Cvar Range List - pb_sv_cvar [cvar_name] [type] [value(s)]
pb_sv_cvarempty

;PB UCON Settings / Lists
pb_sv_usessionlimit 0
pb_sv_ucontimeout 300
pb_sv_uconempty
pb_sv_uconignoreempty


pb_sv_load pbsvlog.cfg


I don't know the exact wording i get when i enter pb cmds.  i will check after work today.  the clanservers.log file only goes back to may 3rd.  i haven't tried the pb cmds for about a week so that doesn't help.  i'll try it out tonight and see what shows up and post what it says. 

thanks



edited * webkey was published, you'll want to change it*

[aLeX^rS]

I've finally tested PBCool on Vista.
All PBCool errors on Vista happen because of the Desktop Shortcut properties.

To fix the problem please read my post:
http://pbcool.19.forumer.com/viewtopic.php?t=7

Alex

[Doc.Blade]

any word on the new version with the FTP screen shot url support Alex?

[dannyboy11]

Where can I download PB Cool?

[=ACES=I_pee_freely]

http://pbcool-new.blogspot.com/2006/10/download_02.html

[aLeX^rS]

New Update

PBCool 3.9.6

http://pbcool-new.blogspot.com/

[IB[S.a.n.d.m.a.n]]

New Update

PBCool 3.9.6

http://pbcool-new.blogspot.com/

I have installed version 3.9.6, install was clean old version was deinstalled.  I still get this database error under Vista 64 bit.



and also want let me upload the ban list as the database is then corrupted.


Hope you can fix this, I have had the same errors always under Vista and now under XP it want show any SS's I have just deleted all data from my pb/svss folder and will try again after shots are there again.

[[usse]DrLife]

Same here on vista ultimate 

[aLeX^rS]

Hey guys,

I don't have Vista with which to conduct any tests. I don't have access to any one else's any more either.

If the rest of PBCool functions correctly under your Vista then at-least I have a starting point to start testing.
If either you [IB[S.a.n.d.m.a.n]], or you [[usse]DrLife] would be willing to test a few things for me, then it's possible that I could fix the problem.

It seems to me that Vista doesn't like the ACCESS97 components. PBCool is using DAO 3.51...

If either of you guys have time,
download this: http://alexrs.is-a-geek.com/DAO.zip
Extract the ZIP archive somewhere on your computer.
While logged in as administrator open/execute the BAT file.

Purpose:
Will try fixing dao 351. If it doesn't exist will create it, and register it (it's a self registering active-x/COM ...)

Contents:
DAO2535.TLB
DAO350.DLL
INSTALL.bat

[INSTALL.bat]

Code: [Select]

@echo off
set daopath=%PROGRAMFILES%\Common Files\Microsoft Shared\DAO\
set daotlb=%daopath%DAO2535.TLB
set daodll=%daopath%DAO350.DLL
REM DAO2535.TLB, DAO350.DLL
echo ==========================================
echo #        TESTING DAO35 (DAO351)          #
ECHO ==========================================
if exist "%daotlb%" goto tlbexists
color C
echo -  WARNING!!!!!!!!
echo -  %daotlb% doesnt exist! BAD!
echo ==========================================
echo #        CREATING       DAO2535.TLB      #
ECHO ==========================================
copy /B "DAO2535.TLB" /B "%daopath%"DAO2535.TLB
if exist "%daotlb%" goto trydll
echo FAILED TO CREATE "DAO2535.TLB"
goto done
:tlbexists
echo -  DAO2535.TLB exists. Good!

:trydll
ECHO ==========================================
ECHO #       PROCESSING DAO350.DLL            #
ECHO ==========================================
if exist "%daodll%" goto dllexists
color C
echo -  ERROR! "%daodll%" doesnt exist!
echo -  path listing...
dir /B
echo ==========================================
echo #        CREATING       DAO350.DLL       #
ECHO ==========================================
copy /B "DAO350.DLL" /B "%daopath%"DAO350.DLL
if exist "%daodll%" goto dllexists
echo FAILED TO CREATE "DAO350.DLL"
goto done
:dllexists
echo -  Unregistering... DAO350.DLL
Regsvr32.exe /U /s "%daodll%"
echo -  Registering DAO350.DLL
Regsvr32.exe /s "%daodll%"
color A
ECHO ==========================================
echo #              FINISHED                  #
ECHO ==========================================
echo -  Try PBCool Again.. If you get the same problem let me know!
:done
echo --------------------------
echo ######
echo #     #
echo #     #  #### ###  ####
echo #     #  #  # #  # #  #
echo #    #   #  # #  # ###
echo #####    #### #  # ####
echo --------------------------
pause
And if you wouldn't mind taking a screen shot of the console when it's done so I know it did... ALT+PRINT SCREEN so that you only capture the console plz

[{FMZ}NYPDSwat]

I have Vista Home Basic & this is the only error I'm getting

[aLeX^rS]

Hmm. I love vista already.

Does that happen on any server you connect to, or just the one your connected to in the screen shot?
Does it happen every time?

[{FMZ}NYPDSwat]

Yes this happens any server I connect to

[Mattma[AON]]

Alex I didn't get it in the beta, but I am getting the same as Swat in release version. And I also get the one that I sent to you already. It happens at startup.

[{FMZ}NYPDSwat]

you'll have work out a Vista beta test group to help you

[aLeX^rS]

Alex I didn't get it in the beta, but I am getting the same as Swat in release version. And I also get the one that I sent to you already. It happens at startup.

]
you'll have work out a Vista beta test group to help you Smiley

Looks like I'll be making a patch with-in 48 hours of a release... What am I? Microsoft? lol... 
Ok thanks for the feedback guys... I'm gonna plug away at her again.

Yes I will Swat =D
After some fixes I'll post a link here to get any of you who are willing to give it a test drive so I can address all the errors before I put it on SourceForge and look like a retard